Orbi 750 Satellite Firmware Update Failed?
Are you stuck during the Orbi 750 satellite firmware update? You have reached the correct post. This post will run you through the effective yet easy troubleshooting tips to remove the Orbi firmware update problem. Once the problem is removed, you can easily update the Orbi RBS750 satellite. Let’s begin.
How to Fix Orbi 750 Satellite Firmware Update Failure?
First, we will tell you very basic troubleshooting steps. Follow these first and if the issue persists, then you should apply the solutions that we have highlighted ahead:
- Your Orbi 750 satellite should be powered on with a steady power connection. Try plugging it into another socket and also verify the power adapter.
- The satellite must be placed within the range of the Orbi router. Move it a bit closer and then try updating it.
- Power it off and unplug it for a while. After that, plug it back in and then try the firmware update process.
After you have verified all this, if the Orbi RBS750 satellite still can’t be updated, then try your hands on the remedies discussed below:
Use Web Interface to Update Satellite
Are you using the Orbi app to update your satellite? Well, we suggest you update the satellite using the web interface. Connect your PC to Orbi’s network and then log in to Orbi on a browser using the Orbilogin URL. If the URL orbilogin.net does not work, then use the IP address 192.168.1.1 to proceed further to log in. Update Orbi satellite now.
Connect Using a LAN Cable
You are suggested to connect your computer to the Orbi’s network using a LAN connection. At times WiFi connection is not stable. A shaky connection is one of the most common reasons why the firmware update fails. Therefore, grab a LAN cable and use it to join Orbi’s network on your PC. Update firmware on your satellite now without getting stuck.
Use the Manual Method
You can update your Orbi satellite using the manual method. Here, you should first download the firmware file on your PC. This file is then installed by logging into the Orbi system. It is to be ensured that you download the correct file depending on the model number which is RBS750 to prevent obstructions during the update.
Update Satellite First
While updating the Orbi mesh system, you are recommended to update the Orbi satellite first and then update your router. Here are the steps to be followed toupdate your Orbi satellite:
- Download the firmware file on your computer and unzip the file.
- Connect your PC to Orbi’s network using a LAN cable.
- Run an internet browser and visit orbilogin.net.
- Use the Orbi login credentials and log in.
- Go to Advanced > Administration > Firmware Update.
- Select the Manual Update tab now.
- Click on the checkbox next to the Orbi satellite model number that you own.
- Now, click on the Update button to open the firmware update page.
- You should now click on the Browse button and navigate to select the firmware file.
- To install the file, click on the Upload button.
- Let the firmware update finish.
Reset Orbi 750 Satellite
By any chance, if thefirmware update still can’t be completed, you should reset the Orbi satellite. Use the Reset pinhole located at the back of the satellite to complete the reset process. Upon resetting it, configure it all over again from the very beginning. Sync it with the Orbi router and then update its firmware.
The Final Note
It is expected that after applying the solutions listed in this post, you should be able to updatethe Orbi 750 satellite without any problem. We suggest you regularly check for firmware updates for your Orbi system. As soon as there’s an update ready, get them installed on your mesh system.
