Orbi Flashing White Light: How to Fix?
The LEDs on your Orbi system are meant to help you determine the working status of the Orbi device. In this guide, we’ll cover about Orbi flashing white light. We will help you understand its meaning and provide you with effective yet easy troubleshooting tips to get rid of the Orbi blinking white light. Let’s begin.
Netgear Orbi Flashing White Light Meaning
The white light on the ring LED of the Orbi router means it is powering up or it is trying to make a WPS connection. Once the router completely boots up or the WPS connection is established, the Orbi router flashing white light stops.
The flashing white light on the Orbi satellite has a different implication. This means the satellite is trying to form a connection with the router. The light turns off as soon as the connection is established.
In case the light does not turn off and keeps on flashing then use the tips that we have discussed ahead.
Tips to Fix Orbi Blinking White Light
Whether it is the router or the satellite that flashes white light, the very first solution we suggest is to reboot it. Simply power the Orbi off and unplug the power cable. After you have given the Orbi device enough rest, plug it back in and turn it on. If the Orbi flashing white light still exists then you must give a shot at some more hacks given below.
Check Power Supply
The Orbi won’t boot up completely if it is plugged into a damaged socket.
- Plug it into another socket.
- Verify the power cable and fix it if needed.
- Check the Power LED.
The Orbi must be fully booted up. The satellite can connect to the router only when it is booted up. If it is the router that flashes white then a consistent power supply powers up the router and there won’t be any more white flashing light.
Reattempt WPS Connection
If the white light flashes after a WPS connection attempt then we suggest you try to connect devices once again using Orbi WPS button. Consider this first:
- Make sure that the devices are powered on completely.
- The devices should be in proximity.
- Press the WPS button on the second device within two minutes of pressing the button on the first device.
Update Orbi Firmware
Orbi satellite flashing white light could be due to different or incompatible firmware versions on the Orbi devices. You can try fixing it by having the same firmware version installed on both devices. To do this, you should manually update your Orbi.
- Download the latest firmware files for the Orbi router and satellite depending on the Orbi model that you own. Ensure to download the file from the official web page only.
- Next, connect your PC to the Orbi’s network. To ensure a secure network, make an Ethernet connection.
- Visit orbilogin.net and use the admin credentials to log in to Orbi.
- Go to Advanced > Administration > Firmware Update.
- Select the Manual Update tab. This opens the Firmware Update page.
- Select the Orbi satellite model number you own from the list.
- Click on the Browse button and select the firmware file for the satellite.
- Click Upload to begin the firmware installation.
- Next go back and follow the same steps to update the router.
Wait for some time and let the Orbi firmware update complete. Once the update is done you will notice the Orbi flashing white light has disappeared.
Wrapping it All Up
Under any circumstances the Orbi flashing white light still exists then the ultimate hack is to reset the Orbi device. Use the Reset button on your Orbi to reset it to the factory default settings. After that reconfigure the Orbi system from the very beginning. As you have given your Orbi a new start, it should no longer flash white light.