Orbi Not Connecting to Internet: Let’s Fix it!
Netgear Orbi router is one of the best products. It provides high-speed internet speed in dead zone areas. But, occasionally many people complain about the Orbi not connecting to internet issue. Have you also faced this issue? If you are nodding in yes, then worry not. In this post, we have highlighted easy-to-perform troubleshooting hacks to fix the issue.
Causes: Orbi Not Connecting to Internet
There are numerous reasons why you are facing the Orbi not connecting to internet issue. Here is a list of some possible reasons:
- The Ethernet or power cable is faulty or broken.
- The internet connection is shaky.
- The location of the Orbi devices is not appropriate.
- Hardware or software problem.
- Outdated firmware.
- The power supply is not adequate.
Solutions: Orbi Not Connecting to Internet
There are various ways to resolve the Netgear Orbi not connecting to the internet. Walk through some of them given below:
1. Restart Your Orbi Device
The first and foremost thing you need to do to fix the issue is power cycle the Netgear Orbi devices. Most of the time rebooting your device can solve this type of minor bug. So, restart your device to examine whether can fix the issue. If you are not sure how to reboot the Orbi router then follow the steps given below:
- Initially, remove the power cables that connect to your WiFi devices.
- After that, disconnect your router and modem from the electrical socket.
- Wait for a couple of seconds for your router to reboot.
- Now, connect the wireless devices and insert them into their respective power sources.
2. Verify the Ethernet Cable
The next reason why you are facing the Orbi not connecting to internet issue is due to a defective connection or loose power cable connection. To get rid of this issue, check the Ethernet cable. On the off chance, if you find any cut on it, replace it immediately.
3. Change the Location
As we discussed earlier, the wrong position of the wireless devices also create the issue at hand. To do away with it, place the router within the range of the existing modem. But not too close to the other device. The reason is that the WiFi signal do not communicate properly.
For the best performance of the WiFi router, you need to place it on a higher surface where there is proper ventilation. This will prevent your device from overheating. If you still face this issue then move to the next option.
4. Check the Internet Connection
Another way to resolve the issue is to verify the internet connection. Be sure that you attach the wireless devices correctly. To get a blazing internet connection we suggest you to connect the router and modem through an Ethernet cable. Additionally, you must contact the Internet service provider and ask if there is a network outage.
5. Factory Reset the Router
If none of the aforementioned troubleshooting tips worked for you and due to this issue you are not able to access the Netgear Orbi router login page then no need to worry. We have still one option i.e. reset the Netgear Orbi router to its default settings. For reset,
- Initially, find the Reset button on your Orbi device.
- As soon as you find it, take a sharp pointed object such as a paper clip or oil pin and press or hold the button.
- Wait for a couple of seconds.
- Thereafter, release the button.
In this way, you can easily reset the Orbi device to its factory default mode.
6. Upgrade the Firmware
Older firmware is also to blame for the Orbi’s recurrent internet connection issues, as was already mentioned. The Orbi router often automatically downloads firmware updates, but occasionally the automatic update may cease operating. You must manually check for the firmware upgrade to gain a better internet connection. You can download and install any available updates.
The Bottom Lines
With that! We are ending the guide written on how to resolve the Netgear Orbi not connecting to internet. We expect that with the help of this post, you can easily fix the issue.