All That You Need to Know About Orbi Satellite Colors
Every Netgear Orbi satellite comes with different LED lights located on it. Each LED light has a different meaning. Becoming aware of what various ORBI SATELLITE COLORS mean will help you understand the “work status” of your networking device. Taking this into consideration, walk through the information given in this blog post.
Orbi Satellite Colors: What You Should Know
1. Orbi Satellite Green Light
Your Orbi satellite is turned on when the power button LED displays a solid green light. The minute you connect the satellite to an electrical outlet, you should see the green light. If not, try hitting the satellite’s power button. You will find located it on one of the corners of your device. If the green power button LED is still not visible, your outlet most likely isn’t functioning. In this situation, use a different wall outlet to supply power to the satellite.
2. Orbi Satellite Blue Light
The sync LED of your Orbi satellite should be solid blue if the connection between the router as well as the satellite is strong. One of the top Orbi satellite colors you want to see after setting up your Orbi satellite is the blue light because it signals that everything is linked and operating as it should.
It is advised to take the following actions if you don’t see a blue sync LED:
- Press the Sync button on the router first.
- Press the SYNC button on the satellite’s back in two minutes.
- Let the LED become blue.
3. Orbi Satellite White Light
Your Orbi satellite is actively attempting to sync with the router if the sync LED ring on it is solid white. Your satellite will automatically begin searching for your Orbi router as soon as you plug it in so that it can sync with it. If you’re putting up your satellite for the first time, make sure you hook it in close to your router. Once the connection has been made successfully, you can relocate the device to its permanent location. Make sure that there are no transmitting appliances, electronic equipment, or metal items in the area.
4. Orbi Satellite Red Light
Your Orbi satellite cannot get an IP address from your router or sync to it if the sync LED ring on it displays a SOLID RED LIGHT. This implies that you will need to repeat the setup procedure. To see if the red light goes off before you bring the satellite closer to the router, try bringing it closer beforehand. If it does, you need to move the satellite closer to the router from where it was originally placed because it is too far away.
Your Orbi satellite is attempting to connect to your Orbi router when you see a PULSING RED LIGHT on the sync LED ring for the first time. If the magenta ring LED pulses for more than one minute, it could be for the following reasons:
- The satellite lost the connection to the router.
- Orbi satellite is unable to get an IP address from the router.
A satellite pulsing red for the first time is not a cause for concern. Wait and see if the satellite is able to connect. If it continues to blink the same color, move the satellite closer to the router.
Conclusion
This was all about what different Orbi satellite colors of LED lights mean. We hope that you liked reading this blog post. In case you are interested in gaining more knowledge regarding the same topic, then it is highly recommended that you refer to the information given in the user manual of your networking device.
Apart from green light, white light, blue light, and red light, you will get to know about more different Orbi satellite colors there.