How to Connect Orbi to Starlink Using Easy Steps?

Orbi mesh system is easy to setup in your home. If you want to connect it to any ordinary modem, then you just have to connect the Ethernet cable to Orbi router and modem.

But if you want to link your Starlink to you new Orbi mesh system, then you have to follow some of down written steps.

We will help you to setup and startlink first. Then, provide you some of the steps that help you to connect Orbi to starlinkin your house.

You will go through the sections related to the Orbi setup using the orbilogin interface dashboard. So, why wait let’s start this informative blog straight with the how to setup Starlink in your house.

How to Setup Starlink Device?

The Starlink device is simple to connect with your modem or ISP socket. But, first you have to un-box the Starlink, and take out the main router device, antenna, Starlink cable, power cord and a user manual.

• Start with placing the router near to the modem and connect the cable to the router’s WAN port and modem’s LAN port.
• Now, place the Starlink antenna at a high place to reach the range of the router. Connect it with the router using the Ethernet cable.
• Then, start the Starlink networking device by connecting the power cord to the wall socket and pressing the On/Off button.

After properly setting up the Starlink in your house, let’s connect Orbi to Starlink with the help of simple steps written down here in a section.

How to Connect Orbi to Starlink?

Here, you will learn steps to complete the Orbi setup by connecting it to the Starlink.

• Un-box the Orbi mesh system, you will find Orbi router unit, two satellite devices, Ethernet cable, power cord, and user manual.
• Place the router close to the Starlink, and with the help of the network cable just connect the together.
• You should have to connect the Ethernet cable to the LAN port of the Starlink and WAN port of the Orbi router.
• Then, you have to connect the Orbi router to the Orbi satellites wirelessly. to connect, turn on the router by inserting its power cord to wall socket.
• Turn on the satellites by inserting its power cord to the electric wall socket and pressing On/Off button.
• Hit the sync button on the router and satellites to connect all the Orbi devices together wirelessly.

The Orbi to Starlink connection is incomplete yet, to complete it you must access theOrbi interface using your computer via orbilogin.net.

How to Log in to Orbi Mesh System?

This part of the blog will give you information about how to log in to the Orbi router mesh system with the help of your computer.

• The first step to access the interface is connecting the computer to the Orbi network using the LAN cable.
• Now, search the login URL orbilogin.net address or 192.168.1.1 IP in the web browser of your computer.
• You will reach the interface login page of the Orbi router. Here, you have to type the username and password.
• The login credentials are given in the user manual of the Orbi system. Just type the username and password, click on the Next button.
• The interface dashboard will open and here you can adjust the Orbi settings and networks.

Orbi firmware update, change admin credentials and enable features are done from this web interface of Orbi.

Have a look at some of the troubleshooting tips that help you to make the connection secure and strong.

Troubleshooting Tips

• Don’t use damaged cables like Ethernet cable or power cord to connect Orbi to Starlink.
• Never use the outdated web browser version to log in to the Orbi router via orbilogin.net.
• Use an optimal location in your home to establish your new router to Starlink device connection.

In Conclusion

Here, you have learned how to connect Orbi to Starlink with the help of some easy steps. You have gone through Star link setup first and then connection between the Orbi and Starlink via Ethernet cable. To end the connection, we have provided information about how to access Orbi interface dashboard using orbilogin.net.